Shutter Pricing & Calculator
Vinyl Shutters Are Easy to Install, Easy to Care For, and Beautiful!
Click Here to see Testimonials, along with pictures of shutters customers have installed, on our Facebook Page.
CLICK HERE to review the steps required to complete an order. For Questions or To Order, Call 888-887-4623 or email sales@riverwoodshutters.com.
Click Here for More Detail on Frames.
Pricing Details:
Inside Mount To figure square footage:
- Measure the window width and height per the measuring instructions provided on this site.
- Add the frame size (see calculator) to the opening size for pricing, Not for ordering.
- For pricing purposes, round up fractions of an inch to the next full inch.
- Multiply the width x height = sq.inches and divide by 144 to get sq.feet.
- Then round up the result and multiply by $22.00 to get your standard cost.
Example:
- Window inside opening is 30 1/4 x 60 5/8.
- Using the Trim Frame, add 1 3/16″ to each side, if 4 sides frame.
- Size becomes 32 5/8″ x 63″.
- Round up to 33″ x 63″ = 2079 sq. inches.
- 2079 devided by 144 = 14.40 sq. ft.
- Round up to 15 sq. ft.
- 15 sq. ft x $22.00 = $330.00.
- Then add the surcharges, if any.
- Add Freight.
Outside Mount To figure square footage:
- Measure the window width and height per the measuring instructions provided on this site.
- These measurement should already include the frame.
- For pricing purposes, round up fractions of an inch to the next full inch.
- Multiply the width x height = square inches and divide by 144 to get square feet.
- Then round up the result and multiply by $22.00 to get your standard cost.
Example:
- Window is 34 1/2″wide x 46 1/4″ high.
- Round up to 35″ x 47″ = 1645 sq. inches.
- 1645 devided by 144 = 11.42 sq. ft.
- Round up to 12 sq. ft.
- 12 sq. ft. x $22.00 = $264.00.
- Then add the surcharges, if any.
- Add Freight.
Minimum size for pricing is 6 square feet (but order correct size.)
- If width is less than 24″, use 24″ for pricing purposes.
- If height is less than 36″, use 36″ for pricing purposes.
- 24″ x 36″ = 6 sq. ft.
Shutters can also be installed on French Doors, Closets, Arches and Patio Doors. Go to Contact Us or For Quote, or Call 888-887-4623 for details and pricing for these products.
No Charge Shutter Options:
- Louver Size: 2-1/2, 3-1/2, or 4-1/2 inch.
- Colors: White, Ivory, or Almond.
- Louver Tilt Control: Traditional Tilt Bar in front.
- Panel Locks and Magnets.
- Divider Rails.
- T Posts.
Surcharge Shutter Options:
- Freight:$75.00 for first shutter and $25.00 for each additional shutter.
- Double Hung Shutters: $60.00.
- Extensions for Outside Mount: $40.00.
- Casing Frame – 10%.
- Clearview: (rear tilt bar) 10%.
- Hidden Tilt or Gear: 15%.
- Stainless Steel Hinges: $5.00 per panel.
- 5″ Deluxe Valance for Patio Doors $10.00 linear ft.
- French Door Cutouts: $150.00.
- Extension Poles: $55.00.
- By Pass and BiFold Track Systems: contact us for pricing.
- Specialty Shapes: $15.00 linear inch (largest direction).
Shutter with L frame or direct hinge mount and front tilt bar cost $22.00 per square foot. Add on measurements listed for all other inside mount frames.